资料下载
×
ISL73096RH, ISL73127RH, ISL731
消耗积分:5 |
格式:rar |
大小:333 |
2009-02-10
分享资料个
The ISL73096RH, ISL73127RH and ISL73128RH are radiation hardened bipolar transistor arrays. The ISL73096RH consists of three NPN transistors and two PNP
transistors on a common substrate. The ISL73127RH
consists of five NPN transistors on a common substrate. The
ISL73128RH consists of five PNP transistors on a common
substrate. One of our bonded wafer, dielectrically isolated
fabrication processes provides an immunity to Single Event
Latch-up and the capability of highly reliable performance in
any radiation environment.
The high gain-bandwidth product and low noise figure of
these transistors make them ideal for use in high frequency
amplifier and mixer applications. Monolithic construction of
the NPN and PNP transistors provides the closest electrical
and thermal matching possible. Access is provided to each
terminal of the transistors for maximum application flexibility.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-07218. A “hot-link” is provided on our website for downloading.
transistors on a common substrate. The ISL73127RH
consists of five NPN transistors on a common substrate. The
ISL73128RH consists of five PNP transistors on a common
substrate. One of our bonded wafer, dielectrically isolated
fabrication processes provides an immunity to Single Event
Latch-up and the capability of highly reliable performance in
any radiation environment.
The high gain-bandwidth product and low noise figure of
these transistors make them ideal for use in high frequency
amplifier and mixer applications. Monolithic construction of
the NPN and PNP transistors provides the closest electrical
and thermal matching possible. Access is provided to each
terminal of the transistors for maximum application flexibility.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-07218. A “hot-link” is provided on our website for downloading.
声明：本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人，不代表电子发烧友网立场。文章及其配图仅供工程师学习之用，如有内容侵权或者其他违规问题，请联系本站处理。 举报投诉
评论(0)
发评论
- 相关下载
- 相关文章
