制 造 商:Renesas
封 装: SOP-5
最小包装: 2000PCS/REEL
DESCRIPTION The PS9303L and PS9303L2 are optical coupled high-speed, totem pole output (active high output type) isolators containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9303L and PS9303L2 are specified high CMR and pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9303L is lead bending type (Gull-wing) for surface mounting. The PS9303L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES • High common mode transient immunity (CMH, CML = 15 kV/ s MIN.) • Half size of 8-pin DIP • Pulse width distortion ( tPLH tPHL = 350 ns MAX.) • High-speed (1 Mbps) • High isolation voltage (BV = 5 000 Vr.m.s.) • Totem pole output (Active High Output Type) • Ordering number of tape product: PS9303L-E3, PS9303L2-E3: 2 000 pcs/reel • Pb-Free product • Safety standards • UL approved: No. E72422 • CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950) • DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option)
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !