The host processor on the Intel Edison development board is connected to a Broadcom BCM43340 combo chip via UART (uart0 mapped to /dev/MFD0) as transport layer and uses additional GPIOs to handle power (on, reset,etc.), OOB (out-of-band) signaling for UART to support low power mode.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉