The AD811 is also excellent for pulsed applications where transient response is critical. It can achieve a maximum slew rate of
greater than 2500 V/µs with a settling time of less than 25 ns to
0.1% on a 2 volt step and 65 ns to 0.01% on a 10 volt step.
The AD811 is ideal as an ADC or DAC buffer in data acquisition systems due to its low distortion up to 10 MHz and its
wide unity gain bandwidth. Because the AD811 is a current
feedback amplifier, this bandwidth can be maintained over a
wide range of gains. The AD811 also offers low voltage and
current noise of 1.9 nV/√Hz and 20 pA/√Hz, respectively, and
excellent dc accuracy for wide dynamic range applications
The AD811 is a wideband current-feedback operational amplifier, optimized for broadcast quality video systems. The –3 dB
bandwidth of 120 MHz at a gain of +2 and differential gain and
phase of 0.01% and 0.01° (RL = 150 Ω) make the AD811 an
excellent choice for all video systems. The AD811 is designed to
meet a stringent 0.1 dB gain flatness specification to a bandwidth of 35 MHz (G = +2) in addition to the low differential
gain and phase errors. This performance is achieved whether
driving one or two back terminated 75 Ω cables, with a low
power supply current of 16.5 mA. Furthermore, the AD811 is
specified over a power supply range of ±4.5 V to ±18 V.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !