Calculation of the Differential Impedance of Tracks on FR4 substrates
There is a discrepancy between calculated and measured values of impedance for differential transmission lines
on FR4. This is especially noticeable in the case of surface microstrip configurations. The anomaly is shown to
be due to the nature of the substrate material. This needs to be considered as a layered structure of epoxy resin
and glass fibre. Calculations, using Boundary Element field methods, show that the distribution of the electric
field within this layered structure determines the apparent dielectric constant and therefore affects the
impedance. Thus FR4 cannot be considered to be uniform dielectric when calculating differential impedance.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !