暨第9 届全国质量管理研讨会
1. INTRODUCTION
Visual inspection is the actual checking of quality attributes for conformance to
specifications by human beings. In traditional inspection processes, a quality control
inspector measured product characteristics after a production operation [1]. So the
performance and decision making of inspectors play a key role in inspection tasks.
However, there are a number of human factors that influence the effectiveness of quality
inspection performance [2,3]. A few of these will be discussed.
2. CAUSES OF INSPECTION ERRORS
The inspection of products as in manufacturing processes is in certain respects
similar to monitoring tasks in that the inspector must continually be on the lookout for
defective items. With each product examined, the inspector must decide if all of the
examined items of specification are met. If any specification item was not met, then the
inspector was supposed to reject the product.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !