The CD74HCT4514 and CD74HCT4515 are high-speed silicon-gate devices consisting of a 4-bit strobed latch and a 4-line to 16-line decoder. The selected output is enabled by a low on the enable (E)\ input. A high on E\ inhibits selection of any output. Demultiplexing is accomplished by using E\ as the data input and the select inputs (A0–A3) as addresses. E\ also serves as a chip select when these devices are cascaded.
When the latch enable (LE)\ is high, the output follows changes in the inputs (see decode function table). When LE\ is low, the output is isolated from changes in the input and remains at the level (high for the ’4514, low for the ’4515) it had before the latch was enabled.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !