The bq24640 is highly integrated switch-mode super capacitor charge controller. It offers a constant- frequency synchronous PWM controller with high accuracy charge current and voltage regulation, and charge status monitoring.
The bq24640 charges super capacitor in two phases: constant current and constant voltage. The charge starts from down to 0V with current set on ISET pin. The charge current starts tapering down, when the voltage on VFB reaches an internal reference.
The bq24640 enters a low-current sleep mode (<15µA) when the input voltage falls below the output capacitor voltage.
The bq24640 has input CE pin to enable and disable charge, and two output pins, STAT and PG, to report charge and adapter status.
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !