您是否能够构建任何“普通香草”STM32示例项目 - 例如，发现板和/或其中一个DevKits？
也许从那里开始会更容易，并逐渐引入iNEMO位...？
它会告诉你如何为Keil建立一个项目;然后你可以把它与IAR的东西进行比较 - 可能会更好地了解你出错的地方......？
交叉发布：http：//www.keil.com/forum/20905
以上来自于谷歌翻译
以下为原文
Have you been able to build any of the ''plain vanilla'' STM32 example projects - eg, for a Discovery board, and/or one of the DevKits?
Perhaps it would be easier to start from there, and gradually bring-in the iNEMO bits...?
It would show you how to set-up a project for Keil; and you could then compare it against the IAR stuff - might give a better idea of where you're going wrong...?
Cross post: http://www.keil.com/forum/20905
您是否能够构建任何“普通香草”STM32示例项目 - 例如，发现板和/或其中一个DevKits？
也许从那里开始会更容易，并逐渐引入iNEMO位...？
它会告诉你如何为Keil建立一个项目;然后你可以把它与IAR的东西进行比较 - 可能会更好地了解你出错的地方......？
交叉发布：http：//www.keil.com/forum/20905
以上来自于谷歌翻译
以下为原文
Have you been able to build any of the ''plain vanilla'' STM32 example projects - eg, for a Discovery board, and/or one of the DevKits?
Perhaps it would be easier to start from there, and gradually bring-in the iNEMO bits...?
It would show you how to set-up a project for Keil; and you could then compare it against the IAR stuff - might give a better idea of where you're going wrong...?
Cross post: http://www.keil.com/forum/20905
举报
