嗨，对于Ecal，您不需要校准套件定义，因此请继续进行Ecal校准。
这可以完成，因为在Ecal工厂校准时，已经测量了所有反射状态和直通状态，并且这些值已经加载到Ecal模块的内部存储器中。
因此，您无需在VNA上定义校准套件参数。
以上来自于谷歌翻译
以下为原文
Hi, for Ecal you don't need a cal kit definition, so go ahead with the Ecal calibration.
This can be done because at the time of Ecal factory calibration, all the reflection states and thru state have been measured, and the values have been loaded to the internal memory of the Ecal module. So you don't need to define the cal kit parameters on the VNA.
嗨，对于Ecal，您不需要校准套件定义，因此请继续进行Ecal校准。
这可以完成，因为在Ecal工厂校准时，已经测量了所有反射状态和直通状态，并且这些值已经加载到Ecal模块的内部存储器中。
因此，您无需在VNA上定义校准套件参数。
以上来自于谷歌翻译
以下为原文
Hi, for Ecal you don't need a cal kit definition, so go ahead with the Ecal calibration.
This can be done because at the time of Ecal factory calibration, all the reflection states and thru state have been measured, and the values have been loaded to the internal memory of the Ecal module. So you don't need to define the cal kit parameters on the VNA.
举报
举报
