你好,
我比较了CGG2和CGG3之间的框图。
在CG2上有RD1引脚,但在CGG3上没有。连接到cc1/cc2的块的两个
威廉希尔官方网站
非常相似。
所以我不能理解为什么PD1针需要连接到cc1引脚。
请让我知道PD1和CG3的角色的细节不需要PD1针。
最好的问候,
以上来自于百度翻译
以下为原文
Hello,
I am comparing the block diagram between CCG2 and CCG3.
There is RD1 pin on CCG2 but no it on CCG3. wheres the both circuit of blocks connec
ting to CC1/CC2 are quite similar.
So I can not understand why PD1 pin need to connect to CC1 pin.
Please let me know the detail of the role for PD1 and CCG3 does not need PD1 pin.
Best regards,