我想到了。
为了其他newbs的好处...要在一个图上获得几个模拟的结果，您只需更改每个模拟的数据集名称。
然后，在“常规”选项卡中的一个图形属性中，添加其他模拟的结果。
小心模仿变量名称的行。
从“其他测量”中选择应该是相同的测量结果可能会不可避免地弄乱标尺。
最好输入它们。
以上来自于谷歌翻译
以下为原文
I figured it out. For the benefit of other newbs... To get the results of several simulations on one plot you just change the name of the dataset for each simulation. Then, in the "general" tab one of the graph properties, you add the results of the other simulations. Be careful to mimic the variable name from line to line. Selecting what should be identical measurements from the "other measurements" can irrecoverably screw up the scales. Better to type them in.
我想到了。
为了其他newbs的好处...要在一个图上获得几个模拟的结果，您只需更改每个模拟的数据集名称。
然后，在“常规”选项卡中的一个图形属性中，添加其他模拟的结果。
小心模仿变量名称的行。
从“其他测量”中选择应该是相同的测量结果可能会不可避免地弄乱标尺。
最好输入它们。
以上来自于谷歌翻译
以下为原文
I figured it out. For the benefit of other newbs... To get the results of several simulations on one plot you just change the name of the dataset for each simulation. Then, in the "general" tab one of the graph properties, you add the results of the other simulations. Be careful to mimic the variable name from line to line. Selecting what should be identical measurements from the "other measurements" can irrecoverably screw up the scales. Better to type them in.
举报
举报
