嗨恩里科，
感谢您的反馈意见。
已配置Workbench项目（功率级 - >电流读取拓扑 - >一个分流电阻）作为两个电机的1个分流电阻传感器。
与霍尔传感器一起支持的两个电机是否有1个分流电阻检测？
以上来自于谷歌翻译
以下为原文
Hi Enrico,
Thanks for your feedback.
Workbench Project has been configured (Power Stage -> Current reading topology -> One Shunt Resistor) as 1 shunt resistor sensing for both motors.
Is 1 shunt resistor sensing for both motors supported in combination with Hall sensors?
嗨恩里科，
感谢您的反馈意见。
已配置Workbench项目（功率级 - >电流读取拓扑 - >一个分流电阻）作为两个电机的1个分流电阻传感器。
与霍尔传感器一起支持的两个电机是否有1个分流电阻检测？
以上来自于谷歌翻译
以下为原文
Hi Enrico,
Thanks for your feedback.
Workbench Project has been configured (Power Stage -> Current reading topology -> One Shunt Resistor) as 1 shunt resistor sensing for both motors.
Is 1 shunt resistor sensing for both motors supported in combination with Hall sensors?
举报
举报
