Cypress技术william hill官网
直播中

石建军

7年用户 168经验值
私信 关注
[问答]

psoc5lp上拉电阻是多少?

你好,
实验的一个psoc5lp上拉电阻是多少?.
目前我有一个psoc5lp连接20个SPI从设备与20个独立的片选线(数字输出电阻上拉)。
由于引脚连接到Vdd,我想知道多少是目前的画,如果我需要外部上拉电阻

以上来自于百度翻译


     以下为原文
  Hi,
    How  much is the resistance of the internall pull-up of a PSoC5LP?.
    Currently I have a PSoC5LP connected to 20 SPI Slave devices with 20 separate chip select lines (digital output, resistive pull up).
    Since the pins are connected to Vdd, I would like to know how nuch is the current draws, and if I need an external pullup resistor

回帖(11)

王淑珍

2019-1-15 12:48:43
GPIO上拉/下拉电阻-最小3.5K,类型5.6K最大85.K

以上来自于百度翻译


     以下为原文
   GPIO pullup/pulldown  resistor - min 3.5k, typ.5.6k max 8.5k
举报

王琳

2019-1-15 13:04:03
这是不推荐使用内部上拉电阻I2C。所有图纸总是有外部上拉电阻显示。即使是先锋板也使用外部拉绳。
鲍勃

以上来自于百度翻译


     以下为原文
  It is nowhere recommended to use the internal pullups for I2C. In all drawings there are always external pullups shown. Even the pioneer board uses external pullups.
     
    Bob
举报

石建军

2019-1-15 13:20:58
谢谢!
鲍伯,但是I2C不是SPI,对吧?

以上来自于百度翻译


     以下为原文
  @HL thanks
    @Bob, but that for I2C not SPI, right?
举报

王琳

2019-1-15 13:39:14
对不起,只有I2C。迷信红
鲍勃

以上来自于百度翻译


     以下为原文
  Sorry, that was for I2C only. Mis-red
     
    Bob
举报

更多回帖

发帖
×
20
完善资料,
赚取积分