怎么将库2.0上的应用程序库从STM32F103迁移到STM32F051

Ciao yongfei.liu
 
 我的建议是转移到支持STM32F051的新版MC库
 
 再见
 梁咏琪



以下为原文





Ciao yongfei.liu

My suggestion is to move to the new version of the MC library that supports STM32F051

Ciao
Gigi

Ciao Gigi
我的教授想研究FOC算法代码的逻辑关系，最后将应用程序迁移到stm32f051xx，所以我这样做。但是我发现MC_FOC_Methods_lib.lib和MC_State_Observer_lib.lib中包含了一些函数，包含一些基于的汇编指令Cortex-M3，以产生上述错误。在STM32F0x系列支持下的3.4电机控制固件和软件不向我们开源代码。现在我想知道贵公司是否可以打开源代码给我们大学与否？电子邮件：lyfczjl@sina.com或1835116269@qq.com祝你好运!!!!!!



以下为原文







Ciao Gigi
My professor want to study the logical relationship of code for FOC algorithm，and migrate the application to stm32f051xx in the end，so i do that.However I found some functions included in MC_FOC_Methods_lib.lib and MC_State_Observer_lib.lib,containing some assembly instructions based on Cortex-M3，so as to generate    the above errors.The Motor Control Firmware and Software for 3.4 with support  of  the  STM32F0x  family   don't open source code to us .Now I want to know whether your company can open the source codes to our university or not?  E-mail: lyfczjl@sina.com  or 1835116269@qq.com   Best wishes for you！！！！！！

Ciao yongfei.liu
 
 
 对不起，目前代码的某些部分无法与开放源代码一起发布，而且没有与客户签署的NDA，也没有真正的业务。
 
 再见
 梁咏琪



以下为原文





Ciao yongfei.liu


I'm sorry, at the moment some parts of the code can't be released with open sources without a signed NDA with the customer and without a real businnes beyond.

Ciao
Gigi