如何使用Segger jLink调试PSOC？

我在william hill官网 上搜索，但人们都在问如何使用GDB的JLink…
我买了一个J-Link，我有OLIMEX线，我把探针连接到PSoC 4先锋，但是现在…
我只是认为J-Link将为芯片提供动力，PSoC creator会认可它。
我把这些都倒过来了吗？我的编程工具的经验完全局限于微芯片提供的，所以我正试图使用它像他们的工具（ICD，PICIT）。
我知道PSoC先驱4有一个内置的调试器，但我想尝试我的JLink，因为我将尽快建立自定义PCB，并希望看到它们是如何工作的。



     以下为原文
  I searched on the forum but people were all asking how to use the Jlink with GDB..
    I have bought a J-Link Edu and I have the olimex wire and I have connected the probe to the PSoC 4 Pioneer but now what..
    I just thought that the J-Link would power the chip and PSoC creator would recognise it..
    Have I got this all backwards.. my experience with programming tools is totally limited to the ones microchip provide so I am attempting to use it like their tools (ICD, PICKIT)
    I know the PSoC pioneer 4 has a built in debugger but I wanted to try out my jlink as I will be building custom pcbs soon and want to see how they work..