如何让VNA打印出来？

回到当天（甚至是现在），Joel是一名RF人;
不是程序员，所以我怀疑他与固件消息有什么关系。
我不知道那个消息到底是什么。



     以下为原文

  Back in the day (and even currently), Joel was an RF guy; not a programmer, so I doubt he had anything to do with that firmware message.  I have no idea what that message is all about.

回到1991年，当我在飞利浦工作时，我们有一个HP8981B矢量调制分析仪，它是一个Beta测试单元。
有一系列关键笔划是合法的功能，但由于Beta固件，机器会偶尔崩溃，显示器CRT会显示一块严重的石头，周围有鲜花，小手伸出地面，拉出一层污垢
超过自己。
非常可爱。
不知道谁为此编程了。
干杯，卡琳约翰逊



     以下为原文

  Back around 1991 when I worked for Philips we had an HP8981B Vector Modulation Analyzer that was a Beta test unit.
There was series of key strokes that were legitimate functions but because of the Beta firmware the machine would crash occasionally and the display CRT would show a grave stone with flowers around it and small hand that would reach out of the ground a pull a blanket of dirt over itself.  Very Cute.  Wonder who did the programming for that.
Cheers,  Karin Johnson

由于8753代码是从8510代码中利用的，该代码是从8566代码中利用的8566代码，因此字符串的来源可以追溯到很长的路。



     以下为原文

  Since the 8753 code was leveraged from the 8510 code which was leveraged from the 8566 code which was leveraged from the 8568 code, the source of the string could go back a very long ways.

> {quote：title = Dr_joel写道：} {quote}>由于8753代码是从8510代码中利用的，8510代码是从8568代码中利用的，因此字符串的来源可以追溯到很长时间
方法。
有人报道了惠普/安捷伦雅虎集团，他们从这里的一些文件中将8753B的固件升级到3.00。
http://www.ko4bb.com/manuals/download.php?file=01_ROM_Images_and_Drivers/HP_8753B_Firmware_Ver3.00.zip我让他们在固件映像上运行“strings”命令。
他们做到了，但没有开玩笑说太晚了。
这表明有人可能介绍了介于8753C和8753ES之间的某个地方。
不像Karin在HP 8981B矢量调制分析仪上提到的那样有趣。
我敢打赌，当她看到它时，给了她一个真正的笑声。
戴夫



     以下为原文

  > {quote:title=Dr_joel wrote:}{quote}
> Since the 8753 code was leveraged from the 8510 code which was leveraged from the 8566 code which was leveraged from the 8568 code, the source of the string could go back a very long ways.

Someone reported on the HP/Agilent Yahoo group they upgraded the firmware of an 8753B to 3.00 from some files here. 

http://www.ko4bb.com/manuals/download.php?file=01_ROM_Images_and_Drivers/HP_8753B_Firmware_Ver3.00.zip

I asked them to run the "strings" command on the firmware images. They did, but there was no jokes about it being too late for fun. This suggests someone probably introduced this somewhere between the 8753C and 8753ES. 

Not as funny as the one Karin mentions on the HP 8981B Vector Modulation Analyzer though. I bet that gave her a real laugh when she see it. 

Dave