USB On-the-Go Transceiver and Charge Pump
♦ USB 2.0-Compliant Full-/Low-Speed OTG
Transceivers
♦ Ideal for USB On-the-Go, Embedded Host, or
Peripheral Devices
♦ ±15kV ESD Protection on ID_IN, VBUS, D+, and DTerminals
♦ Charge Pumps for VBUS Signaling and Operation
Down to 3V
♦ Internal VBUS and ID Comparators
♦ Internal Switchable Pullup and Pulldown
Resistors for Host/Peripheral Functionality
♦ I2C Bus Interface with Command and Status
Registers
♦ Linear Regulator Powers Internal Circuitry and
D+/D- Pullup Resistors
♦ Supports Car Kit Interrupts and Audio-Mode
Operation
♦ Supports SRP and HNP
♦ Low-Power Shutdown Mode
♦ Available in 32-Pin Thin QFN and 5 x 5 UCSP
Packages
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部0条评论
快来发表一下你的评论吧 !