200 ways to revive a hard drive
We based one of our most popular pop quiz challenges on a situation every tech support person has faced or will face at least once: a failed hard drive. In that particular case, a Compaq Prolinea 4/66 user was getting errors like "disk 0 error" and "invalid drive specification." Here were the other facts in the case:
• The data wasn't backed up.
• The problem came out of nowhere.
• The user had accessed Setup and tried to manually enter the settings for the drive type when "Auto" didn't work.
• There was no startup disk made by this machine.
Reviving a drive like that one—even if only long enough to copy its data before you throw the drive in the garbage—is a tough challenge. When I asked TechRepublic members how they would troubleshoot a situation like this one, we received over 200 solutions, and we heard from a number of TechRepublic members who wanted to know “what everybody else suggested.” So we decided to publish this collection of over 200 ways to revive a hard drive.
In editing this document, we tried as much as possible to preserve the voices of the TechRepublic members who submitted these solutions. Of course, as the legal blurb at the end of the document declares, we can't promise that any of these tips will work in every setting. But we thought you'd enjoy reading what your fellow IT professionals had to say on this subject. Enjoy!
声明:本文内容及配图由入驻作者撰写或者入驻合作网站授权转载。文章观点仅代表作者本人,不代表电子发烧友网立场。文章及其配图仅供工程师学习之用,如有内容侵权或者其他违规问题,请联系本站处理。 举报投诉
全部1条评论
快来发表一下你的评论吧 !