不,实际上我愿意使用ST(STM32f030K6T)和AFE模块(STPM ......)的MCU设计自己的主板。
我想象这个设计:
在那里,我需要建立MCU和AFE之间的低级通信层,但我在你的数据表中找不到一些软件库来促进通信; (仅SPI的硬件描述:
我是否被迫为AFE创建自己的硬件抽象层(HAL)?
还有其他公司提供常规SPI通信接口(已与任何MCU兼容)。
所以我的问题是:
有没有
库通过SPI读写?如果不是我怎么能这样做(考虑到我会,但STPM ...和MCU可分离并设计我的板)?
谢谢
以上来自于谷歌翻译
以下为原文
No, in fact i am willing to design my own board, using a MCU from ST (STM32f030K6T) and an AFE module (STPM...).
I imagined this design:
There for, i need to establish the low level communication layer between MCU and AFE, but i couldn't find in your datasheet, some software libraries to facilitate the communication; (only hardware description of SPI :
Am i forced to create my own Hardware Abstraction Layer (HAL) for the AFE ??
There is other companies providing a regular SPI communication Interface (already compatible with any MCU).
So my question is:
Is there any
libraries to read and write through SPI ? if not how can i do it then (considering that i will but the STPM.. and MCU separably and design my board)?
Thank you
不,实际上我愿意使用ST(STM32f030K6T)和AFE模块(STPM ......)的MCU设计自己的主板。
我想象这个设计:
在那里,我需要建立MCU和AFE之间的低级通信层,但我在你的数据表中找不到一些软件库来促进通信; (仅SPI的硬件描述:
我是否被迫为AFE创建自己的硬件抽象层(HAL)?
还有其他公司提供常规SPI通信接口(已与任何MCU兼容)。
所以我的问题是:
有没有
库通过SPI读写?如果不是我怎么能这样做(考虑到我会,但STPM ...和MCU可分离并设计我的板)?
谢谢
以上来自于谷歌翻译
以下为原文
No, in fact i am willing to design my own board, using a MCU from ST (STM32f030K6T) and an AFE module (STPM...).
I imagined this design:
There for, i need to establish the low level communication layer between MCU and AFE, but i couldn't find in your datasheet, some software libraries to facilitate the communication; (only hardware description of SPI :
Am i forced to create my own Hardware Abstraction Layer (HAL) for the AFE ??
There is other companies providing a regular SPI communication Interface (already compatible with any MCU).
So my question is:
Is there any
libraries to read and write through SPI ? if not how can i do it then (considering that i will but the STPM.. and MCU separably and design my board)?
Thank you
举报