不确定你的要求，但你可以使用“执行程序”打开一个MSDOS命令提示符并从那里调用任何Tcl例程（如果你在机器上安装了Tcl）.. NET Tcl - 不，我还没来到aross那个
.Regards乌代
以上来自于谷歌翻译
以下为原文
Not sure about your requirement, but you can use "Execute Program" to open a MSDOS command prompt and call any Tcl routine from there (if you have Tcl installed on the machine).
.NET Tcl - no, I have not come aross that.
Regards,
Uday
不确定你的要求，但你可以使用“执行程序”打开一个MSDOS命令提示符并从那里调用任何Tcl例程（如果你在机器上安装了Tcl）.. NET Tcl - 不，我还没来到aross那个
.Regards乌代
以上来自于谷歌翻译
以下为原文
Not sure about your requirement, but you can use "Execute Program" to open a MSDOS command prompt and call any Tcl routine from there (if you have Tcl installed on the machine).
.NET Tcl - no, I have not come aross that.
Regards,
Uday
举报
举报
