EMI滤波器设计CC驱动器

你好
Bellitto.Patrizia
“你能帮助Rmesh或指向正确的方向吗？
谢谢！
 
 注意：原始帖子包含大量线程对话，只能迁移到第9级



以下为原文




Hi
Bellitto.Patrizia
‌Could you help Rmesh or point in the right direction?
Thanks!

Note: the original post contained a large number of threaded conversations and was only able to be migrated to the 9th level

你好，
我正在联系负责此应用程序的应用程序工程师，以便他可以为您提供更多提示。
同时，你已经查过这个应用笔记，
http://www.st.com/content/ccc/resource/technical/document/application_note/group0/ba/21/1d/6d/45/f6/43/36/DM00335810/files/DM00335810.pdf/jcr：内容/翻译/ en.DM00335810.pdf
？也许你可以在这里找到有用的东西。
最好的祝福，
帕特里齐亚



以下为原文




Hello,
I'm contacting the application engineer responsible for this application so that he can give you more tips.
Meanwhile, have you already checked this application note,  
http://www.st.com/content/ccc/resource/technical/document/application_note/group0/ba/21/1d/6d/45/f6/43/36/DM00335810/files/DM00335810.pdf/jcr:content/translations/en.DM00335810.pdf
?Maybe you can find here something useful.
Best regards,
Patrizia

你好，
我们建议您从现有评估板的值开始，类似于您需要设计的应用程序，然后应用后续调整以找到最佳解决方案。
EMI滤波器设计是实际调整和经验的问题，并且不存在固定规则。
我希望这可以帮助你，与我联系以解决任何其他问题。
最好的祝福，
Patrizia Bellitto
eDesignSuite开发团队



以下为原文




Hello,
we suggest you to start from the values of an existing evaluation board similar to the application you need to design, and then apply subsequent adjustments in order to find the best solution.
EMI filter design is a matter of practical tuning and experience, and fixed rules don't exist.
I hope this can help you, contact me for any other doubt.
Best regards,
Patrizia Bellitto
eDesignSuite developer team

你好
presh.rmesh
，，EMI是一个很大的话题。缺少大量信息来调整EMI滤波器值。强烈建议进行设置和验证测试。
几个问题开始你的想法：
您针对哪种应用程序？提交到哪个标准？需要哪些级别？待机和全功率的行为？
例如，关于发射和抗扰度的EN55014标准为器具应用提供了满额的填充测试和水平。该标准显示的不同于EN55015，关于发射和抗扰度，但适用于照明应用。
请准确地告诉我们，
最好的祝福
伯努瓦
 
 注意：原始帖子包含大量线程对话，只能迁移到第9级



以下为原文




Hello
presh.rmesh
‌,EMI is a large topic. A lot of information are missing to adjust the EMI filter values. Tests for setting and validation are highly recommended.
Few questions to start your thought:
Which kind of application did you target ? Submitted to which standard ? Which levels are required ? Behavior at stand-by and at full power ?
For example the EN55014 standard, about Emission and Immunity, gives tests and levels to fullfill for Appliances applications. This standard shows different levels than the EN55015, about Emission and Immunity also, but for lighting applications.
Let us know accuratly,
Best Regards
Benoit

Note: the original post contained a large number of threaded conversations and was only able to be migrated to the 9th level