51单片机制作霓虹灯的程序+威廉希尔官方网站图

2013-12-5 17:27:26 8119 霓虹灯

霓虹灯的威廉希尔官方网站图:

霓虹灯的51单片机程序:
#include
#define uchar unsigned char
#define uint unsigned int
***it  RED_LED  = P1^0;          //端口定义.
***it  GREEN_LED  = P1^1;
***it  YELLOW_LED  = P1^2;
uint flicker,i,n;
void int0()
{
TMOD=0x01;
TH0=0x3C;
TL0=0xAF;
TR0=1; //启动定时器。
ET0=1; //开定时器中断.
EA=1; //开总中断
}
void main()    //主函数。
{
  n=0;
  i=0;
  GREEN_LED=1;
  YELLOW_LED=1;
  flicker=0;
  int0();
while(1)
{
  if(0<=n&&n<20)
   {
      YELLOW_LED=1;
      GREEN_LED=1;
      RED_LED=flicker;
   }
  if(20<=n&&n<40)
   {
      RED_LED=1;
      YELLOW_LED=1;
      GREEN_LED=flicker;
   }
  if(40<=n&&n<60)
   {
      RED_LED=1;
      GREEN_LED=1;
      YELLOW_LED=flicker;
      if(n==59)
      n=0;
   }
}
}
void time0() interrupt 1
{
TR0=0;
i++;
if(i==10)
  {
flicker=~flicker;
i=0;
n++;
  }
TH0=0x3C;
TL0=0xAF;
TR0=1;
}
下面是另一个用51单片机的霓虹灯2:
如果网页复制的代码无法编译成功可以从:http://www.51hei.com/f/nhddpj_c.rar 这个链接下载
#include
#define uchar unsigned char
#define uint unsigned int
uchar ss[]={0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80,
         0x00,0xff,0x00,0xff,0x00,0x01,0x03,0x06,
         0x0c,0x18,0x30,0x60,0xc0,0x80,0x00,0xff,
0x00,0xff,0x00,0xff,0x00,0x01,0x03,0x07,
0x0e,0x1c,0x38,0x70,0xe0,0xc0,0x80,0x00,
0xff,0x00,0xff,0x00,0x01,0x03,0x07,0x0f,
         0x1e,0x3c,0x78,0xf0,0xe0,0xc0,0x80,0xff,
0x00,0xff,0x00,0xff,0x00,0x78,0xf0,0xff,
0x00,0xff,0x00,0x80,0x40,0x20,0x10,0x08,
0x04,0x02,0x01,0xff,0x00,0xff,0x00,0xff,
0x00,0x80,0xc0,0xe0,0xf0,0xf8,0xfc,0xfe,
0xff,0x7f,0x3f,0x1f,0x0f,0x07,0x03,0x01};
/*数组中为霓虹灯闪烁花样，单流水，双流水，三流水，四流水和倒流*/
uint m,n,i;
void delay(m)
{
  while(m--)
for(i=0;i<120;i++);
}
void main()    //主函数。
{
while(1)
{
  P1=ss[n];
  P3=ss[n];
  delay(400);
  P1=0x00;
n++;
  if(n==96)
n=0;
}
}